How to Set Up a Brostrend Extender via AP.setup or 192.168.10.1

How To Setup a Re.brostrend.Extender via AP.Setup

The Bros Trend Extender can be set up in a variety of ways. However, using a web browser or URL to set up an extender is recommended. An extender can be set up using the URL http://re.brostrend.com or the IP address 192.168.10.1

  1. To begin, connect your extender to the power source and wait for the solid blue power light to illuminate.

  2. In the address box of your browser, put Ap.Setup or 192.168.0.254.

  3. It will now take you to the screen where you may create a login password. For future login purposes, you can create a log in password here.

  4. Choose the wifi you'd like to extend from the drop-down menu.

  5. It will now prompt you to input your wireless password. Click Next or Extend after entering the password.

  6. Applying the settings and waiting for two solid blue lights will take around a minute.

  7. Finally, unplug your extension and connect it to your router through the dead zone.



BrosTrend AC750 Extender Setup via WPS

  1. To begin, connect your Bros Trend AC750 Extender to a power outlet near your router.

  2. Now, hold your breath until you see a solid blue light on the power switch.

  3. On your extender, press the WPS button.

  4. The WPS light on the extension will now begin to blink. The connection between the router and the extension will take a few seconds to establish.

  5. Once you have a firm Blue or Red light on the signal, you are ready to go. It indicates that your extender is operational.

  6. Finally, unplug the extender and re-plug it at the desired spot.

  7. The Signal LED allows users to check the extender's signal strength. If the signal LED is RED in colour, the extender's signal strength is weaker. The extension has a stronger signal if the signal LED is BLUE in colour. If your signal has a RED LED on it, relocate your extension closer to the router.

As An Access Point, Bros Trend AC750

Other Wi-Fi devices can connect to a wired connection or network through the Access Point. The extender will connect to the router via a wired connection, but the user will be able to connect his Wi-Fi devices.

  1. Wait for the solid BLUE power light to appear after plugging your extension into the power outlet.

  2. Use an ethernet cable to connect your extender to your router. Check to see if it's connected properly.

  3. In the address box of your web browser, put 192.168.0.254 or http://re.brostrend.com. Select the Access Point mode from the drop-down menu.

  4. Finally, configure the SSID (Network Name) and Password to your liking and begin utilising them.

Comments

Post a Comment